Addressing type cable telephone line tester ABY-696ES

 

ABY-696ES address type cable tester
1, line function (can look for cable, telephone lines and other kinds of metal wire)
2, can use M-S, M-R, OPEN three kinds of methods to test cable, coaxial cable, telephone line, USB line length
3, the LCD display circuit state function, can test the LCD with the M-S and M-R are two ways to display directly the telephone line, cable, BNC cable, USB line open circuit, short-circuit, cross, disorder and other connections
4, can judge the cable open circuit at one endpoint (left, right, center)
Parameters of various functions, when the 5 test length can be adjusted
A sensitivity of 6, line when the receiver can press demand regulation
7, annex (M-R test) buzzer sound function; line checker accessories with a horn, line when there are vocal function
8, automatic delay shutdown function (15 minutes without any operation LCD will automatically shut down)
9, low voltage display function (when the battery voltage is lower than 6.5V, LCD will display to remind users)
The test cable type: 8P8C:UTP, E6P6C:TELCOM CABL, USB COAXIAL, F (S) TP BNC:COAXIAL
LCD features: 128X64 dot matrix display screen size: 48x32mm
Unit: m (METER), feet (FEET), (YARDS) code
The maximum length of the test cable: 350m
Accuracy: 2% (+ 0.5m or + 1.5ft)
Specification of power supply: DC 9V battery
Power consumption: the working current is less than or equal to 15mA
Size: 149 x 66 x 23mm net weight: 200g
Package: 650g/pc
Working temperature / humidity: 0 DEG C - 50 DEG C /20%-70%
Storage temperature / humidity: the temperature of -10 DEG C - 60 DEG C /10%90%
Detailed description
Warning
1). Tester to be matched with the 9V battery
2). 15 minutes after the automatic closed tester
3). When the battery power is low when the screen will have low power tips, testing instrument is not working properly at low power. This series instrument is specially designed to test network lines, telephone lines, coaxial cable, cannot be used to test other related wire, otherwise it will cause permanent damage to the tester.
Technical specifications
1 screen).
Screen dot matrix 128X64 (effective video range 48x32mm)
2). Power supply
Power supply is the laminated battery 9V, the power consumption is 15 mA.
3). Low power display
Low battery prompt will appear when the 9 volt battery is less than 6.5 volts.
The size of 4).
149x 66x23 mm
5) can test the wire.
STP/UTP twisted pair, coaxial cable, telephone lines, USB line.
6) interface terminals can be tested.
The tester can test all kinds of wire port: RJ45 main port, RJ45 port, BNC port loopback, external BNC port, USB (A) type port, USB port, RJ45 (B) type remote port, RJ11 conversion interface.
7) the working environment temperature.
-10 ------+60 degree centigrade.
8). The measurement of the length of the twisted pair
Range: 1---1200 M
Calibration accuracy: 2% (+/-0.5 m or +/-1.5 feet)
Calibration line of >10 meters
Test accuracy: 3% ((+/-0.5 m or +/-1.5 feet) (AMP, AT&T Class 5 cable)
Display: meters, feet, code.
9). Length calibration
The user can set the length of self calibration for a given length of line, the calibration line length to be longer than 10 meters.
10). Check the line sequence line error
Examination of such as open circuit and short circuit and reverse connection, cross, or conflict.
Check the line 11).
Remote passive test jack (ID 1 > ID8)
12). Time delay automatic shutdown function:
No operation in 15 minutes, the tester will automatically shut down.
13) can be tested and search of 5E, 6E, coaxial line, USB line and telephone line.
14) adjust the volume switch can change the sensitivity of the detection.

 

ABY-696ES 寻址型网线测仪

 

1、寻线功能（能寻找网线、电话线及其它各种金属线）
2、能用M-S、M-R、OPEN三种方法测试网线、同轴电缆线、电话线、USB线的长度
3、LCD显示线路状态功能，能用M-S和M-R两种方式测试LCD直观的显示网线、电话线、BNC电缆、USB线的开路、短路、交叉、乱序等连接情况
4、能判断网线开路在某一端点（左、右、中间）
5、测试长度时各种功能的参数可以调节
6、寻线时接收器的灵敏度可以按需求调节
7、附件（M-R测试时）蜂鸣器有发声功能；查线器的附件有喇叭，寻线时也有发声功能
8、自动延时关机功能（15分钟无任何操作LCD会自动关闭）
9、低电压显示功能（当电池电压低于6.5V时，LCD上会有显示提醒用户）
测试电缆种类： 8P8C:UTP、E6P6C:TELCOM CABL、USB COAXIAL、F(S)TP BNC:COAXIAL
LCD显示屏特点：点阵式128x64 尺寸：48x32mm
单位:米（METER）、英尺（FEET）、码（YARDS）
测试电缆最大长度： 350m
准确率：2% （±0.5m或±1.5ft）
电源规格：DC 9V电池
耗电：工作电流≤15mA
体积：149×66×23mm 净重：200g
包装重量：650g/pc
工作温度/湿度： 0℃－50℃/20％-70％
存储温度/湿度： -10℃－60℃/10％－90％   

 

详细说明

警告
1). 测试仪需配用9V的电池
2). 测试仪15分钟以后自动关闭
3). 当电池电力很低时显示屏将会有低电提示，测试仪在低电 是不能正常工作的。此系列测试仪是专门设计测试网络线、电话线、同轴电缆线的，不能用于测试其它相关线材，否则会对测试仪造成永久性毁坏。

技术规格
1). 显示屏
显示屏点阵128x64（有效视频范围48x32mm）
2). 电源
供电源是9V的叠层电池，耗电量为15 mA。
3). 低电量显示
当9伏的电池量低于6.5伏时将出现低电量提示。
4). 尺寸
149x 66x23 mm
5). 可测试的线材
STP/UTP双绞线、同轴线、电话线、USB信号线。
6). 可测试的接口端子
测试仪可以测试的各种线材端口是：RJ45主端口、回环RJ45端口、BNC端口、外接BNC端口、USB (A)型端口、USB(B)型端口、RJ45远程端口、RJ11转接口。
7). 工作环境温度
-10℃------+60℃.
8). 双绞线长度的测量
范围：1---1200 M
校准精确度：2%（+/-0.5米或+/-1.5英尺）
校准线长>10米
测试精确度: 3%(（+/-0.5米或+/-1.5英尺）(AMP, AT&T Class 5 cable)
显示：米，英尺，码。
9). 长度校准
使用者可以用给定长度的线自我设置校准长度，校准线长度要长过10米。
10).查线序测线误
检查诸如开路、短路、反接、交叉、或干扰冲突。
11).查线
远端无源测试插孔(ID 1 > ID8)
12).延时自动关机功能 ：
15分钟不操作，测试仪便自动关机。
13)可测试和查找5E、6E、同轴线，USB线与电话线。
14)调节音量开关可以改变检测的灵敏度。