ABY-696E network analyzer

 

 1, performance summary:
A network analyzer is mainly used in the rapid detection of network performance, network daily maintenance, network installation and acceptance. Requirements of instrument performance stability, good repeatability, high test accuracy. Instrument for handheld, portable, lightweight, easy to carry. At the same time with the requirements analysis of management software, you can save the historical data, and carries on the analysis and management, test report generation.
2, the function and characteristics
2.1 can perform line test, line parameter can test the RJ-45 cable, such as a line of crosstalk, length, connection, resistance, see wiring diagram, judgement of line connection quality
2.2 there are two 10/100M Ethernet port
2.3 can be a health condition analysis, can test including frame, broadcasting, error, frame check sequence, short frame, conflict, flow rate, parity and other network parameters, in order to check the integrity of the network frame.
2.4 can perform protocol protocol analysis, for some network protocols protocols such as IP, IPX, NETWARE protocol for flow rate, ratio analysis, test of parameter. In order to understand the operation of the network.
Analysis of 2.5 RFC2544 performance: the user can choose the uplink, downlink direction, comprehensive inspection network throughput, delay, packet loss rate and back to back buffer capacity;
2.6 for web browsing
2.7 layer 1, layer 2, layer 3 bit error rate BER testing: end-to-end test network, can select the test pattern and insert error;
2.8 can be carried out through mode testing or the network bandwidth utilization statistics: the maximum and minimum, average, the current value of the statistic network bandwidth utilization, and can count TOP sort according to MAC/IP address; can support between Ethernet packet transparent transmission, and analyzing the flow and speed of data.
2.9 damage and delay analysis, can be conducted in a packet transmission at the same time, damage and delay of data configuration, in order to test network equipment or network robust degree.
2.10 Ping can be tested, can view the data packets and network connectivity status.
2.11 TraceRoute can be tested with node view tracking IP packets arrive at the destination IP through.
2.12 service test test test, the type of service can provide the search network and IP address to provide services.
2.13 types of services including: HTTP, SMTP, POP3, NETBIOS, DHCP, DNS, PROXYHTTP, FTP, TELNET, SQL etc..
2.14 key equipment for testing, you can search on the Internet for critical equipment, such as routers, SQL servers, printers, and a list of key equipment IP address.
2.15 host information test, can obtain the objective of IP equipment host information, including the host name and MAC address.
2.16 SNMP can be information test, can obtain the objective description of IP device system, system ID, system service, the number of ports, system, and routing table and port information.
A test of the 2.17 meter high stable performance, accurate;
2.18 meters for all Chinese operation interface and analysis of management software, the use of more convenient;
2.19 meter has the advantages of compact structure, the real hand, instrument of the weight is less than 1kg;
3, other indicators:
Size: 200mm x 160mm x 45mm
Battery: rechargeable 3600mAH lithium ion battery
Operating temperature: 0 to 40 DEG C
Storage temperature: -30 ~ +70 C
Humidity: 5% to 90% non condensation

 

ABY-696E网络分析仪