RJ45 port cover safety lock connector lock mark  RJ45端口盖安全锁接头锁标记

Factory Line          The tail cable special accessory has the following characteristics, can be installed in the follow-up without tools, can be combined with each other   

尾缆特有的附件具有如下特性,在后续不需工具便可安装,彼此可以组合

Dustproof piece to prevent idle contact from dust and connection point of the mechanical damage, such as SFN switches and wiring frame. At the same time can color tag port. With color markers, different web services can be more visual, such as automatic control, VOIP and video-over-IP, in the control cabinet can be clearly distinguished.                       

 防尘件 防止空闲接点沾染灰尘和连接点遭受机械损伤,如SFN交换机和配线架.同时可以颜色标记端口。有了颜色标记，不同的网络服务可更加可视化，如自动化控制,VOIP和video-over-IP,在控制柜中可以清楚地辨别.

RJ45 port dust cover, use the color marker for SFN switches and connector, corner, 0.00076 KG 

RJ45端口防尘盖,采用颜色标记，用于SFN交换机和转角连接器,0.00076 KG

Color coding helps in wiring rack for a variety of applications in the correct wiring, color coding is especially suitable for connecting cable. Without the use of tools to complete the installation, or later installed. A color code, the user does not need to prepare a variety of cable color

颜色编码    有助于在配线架中为各种应用正确接线,颜色编码特别适合连接线缆。不使用工具就完成安装,也可事后安装。有了颜色编码,用户就不需要准备好多种线缆颜色。

RJ45 Ethernet cable crystal head color markers, 0.00033 KG 

RJ45以太网网线水晶头颜色标记,0.00033 KG

IP54附件 防止环境影响，如灰尘、蒸汽、热水和油污。与颜色编码一样,它可后续安装,确保设备在插、拨情况下均达到IP54防护等级。结合颜色编码，在恶劣的条件下也可实现网络服务可视化。在安装FL IP 54 SPOUT时,仅需一三叉式钳子便可完成,如FL IP54 ASSEMBLY TOOL。

IP54 attachment against environmental influences, such as dust, steam, hot water and oil. As with color coding, it can ensure that the equipment in the subsequent installation, plug, dial the case reached the degree of protection IP54. Combined with color coding, in bad conditions also can realize the visualization of network service. In the installation of FL IP 54 SPOUT, only need a tripod type pliers can be completed, such as the FL IP54 ASSEMBLY TOOL.

Factory Line The reliability of the safety elements of the tail cable network becomes more and more important, decisive effect to the entire firm's future. Special research report shows that more than 70% mistakes and accidents are caused by line fault network facilities and on-line operation error. Passive connection system self selection, it must be strictly to ensure stable and reliable support and Realization of line. Using the new annex Factory Line stern, can meet various security requirements of automation    

尾缆的安全元件 网络的可靠性越发显得重要,对整个公司的将来起决定作用。专门的研究报告表明超过70%的网络错误和事故是由连线设施故障和连线操作错误引起的。 自选择无源连线系统起，便要严格保证支持和实现连线的稳定可靠。利用Factory Line 尾缆的新型附件,均可满足自动化中各种安全要求。

安全夹 FL PATCH SAFE CLIP

The fastener can be installed without tools, can prevent the Ethernet connection unexpectedly broken. Can disconnect the protected only in and operating instructions clear under. By this simple and rapid installation solutions, which can ensure the accidents could disconnect.

紧固件无需工具便可安装,可防止以太网连接意外断开。只有在明确的指令和操作下才可断开受保护的连接。通过这种简单快速安装解决方案，可保证不会发生意外断开。

Wiring connection Factory Line security in the tail cable, FL PATCH GUARD for those who cannot accept the safety box port provides the only protection. This can protect the Ethernet components such as controller port. Since the appearance of slender, can be directly connected to the high density wiring guard port switches, such as FL SWITCH MCS. And the plug guard like, must use a special key to disconnect.

接线护卫 在连接Factory Line 尾缆时，FL PATCH GUARD 为那些不能接受安全框的端口提供唯一的保护。这样便可保护以太网元件如控制器上的端口。由于外型纤细，可以直接将接线护卫连接到高密度端口的交换机，如FL SWITCH MCS。 与插头护卫一样,必须用一特殊钥匙才可断开连接。

Wiring protection joint locks, for FL PATCH, 0.00175 KG

接线保护接头锁具,用于FL PATCH,0.00175 KG

The cable connector lock color marking, for FL PATCH GUARD, 0.000483 KG

网线接头锁具颜色标记,用于FL PATCH GUARD,0.000483 KG

The cable connector lock color marking, for FL PATCH GUARD, 0.000483 KG

网线接头锁具颜色标记,用于FL PATCH GUARD,0.000483 KG