PRODUCT
CONTACT
  • ADDRESS:No.111 NanJing Road Shibi Industrial Area Panyu District of GuangZhou GuangDong,P.R.China
  • TEL:+86 20 83687691
  • FAX:+86 20 83687779
  • Email:nkautomatic@126.com
 
61850 digital microcomputer integrated protection

 

NKE digital substation spacing layer two device 61850 digital microcomputer integrated protection
NKE digital substation spacing layer two device 61850 digital microcomputer integrated protection includes:
NKE-81 digital line protection device
NKE-82 digital transformer backup protection device
NKE-83/NKE-84 digital transformer differential protection device
NKE-85 digital capacitor protection device
NKE-86 digital standby power supply automatic switching device etc.
The device has the advantages of uniform hardware platform, various plug-in uses the modular design, can be flexibly configured according to the requirements of engineering. The device has the following characteristics:
(1) according to IEC 61850 (DL/T860) standard unified modeling, meet the demand of interoperability;
(2) with self description ability, system of the equipment can be automatic mutual recognition, plug and play;
(3) of high performance, high reliability, large resources of the hardware system, using DSP, ARM9, ARM7 combined structure of 3 processors, each processor division of labor cooperation, real-time, reliability is improved greatly;
(4) with the station control of Dual Ethernet MMS interface layer device communication;
(5) and consolidated unit, process layer of the intelligent circuit breaker communication, the maximum 8 high-speed optical fiber Ethernet interface and SV interface and GOOSE interface are independent of each other;
(6) the sampling value network and GOOSE network to separate network, ensure real-time severally, reliability;
(7) through the GOOSE network device release locking information of different intervals between each other;
(8) into the plug-in, plug-ins, open operation circuit can be configured flexibly, maximum 16 into the channel, 19 road open channel;
(9) can receive IRIG-B light for every standard;
(10) large liquid crystal display, user-friendly operation interface, can display a wiring diagram;
(11) can be set up 10 sets of protection setting value, operation of constant value can be set to switch between 10 fixed value, with local and remote setting function, according to the two setting, can also according to a fixed value setting;
(12) the protection / transparent control action process, each device can store the last 32 SOE; records recently recorded data of 10 failures, 10 times to start the 256 event record; record new;
(13) hardware self-test function of intelligent, timing of communication link, supply voltage, RAM, ROM, EEPROM, switch input / output circuit self checking, such as abnormal, timely alarm.

 

 

NKE数字化变电站间隔层二次设备61850数字化综合微机保护

 

 
 NKE数字化变电站间隔层二次设备61850数字化综合微机保护包括:
NKE-81数字式线路保护测控装置
NKE-82数字式变压器后备保护测控装置
NKE-83/NKE-84数字式变压器差动保护装置
NKE-85数字式电容器保护测控装置
NKE-86数字式备用电源自投装置等
 
这些装置具有统一的硬件平台,各种插件采用模块化设计,可根据工程需求灵活配置。装置具有如下特点:
(1)按照IEC 61850(DL/T860)标准统一建模,满足互操作性要求;
(2)具备自我描述能力,系统中的设备可自动相互识别,实现即插即用;
(3)高性能、高可靠、大资源的硬件系统,采用DSP、ARM9、ARM7相结合的3处理器结构,各处理器分工协作,实时性、可靠性大大提高;
(4)具备与站控层装置通信的双以太网MMS接口;
(5)与过程层中的合并单元、智能断路器通信,最大可配置8路高速光纤以太网接口,且SV接口和GOOSE接口相互独立;
(6)采样值网络和GOOSE网络分开组网,保证各自的实时性,可靠性;
(7)装置间通过GOOSE网络发布不同间隔之间的互闭锁信息;
(8)开入插件、开出插件、操作回路插件可灵活配置,最大配置16路开入通道,19路开出通道;
(9)可接收IRIG-B光对时时标;
(10)大液晶显示屏,操作界面人性化,可显示一次接线图;
(11)可设置10套保护定值,运行定值可在10套定值间进行切换,具备就地及远方定值整定功能,可按二次定值整定,也可按一次定值整定;
(12)透明化的保护/测控动作过程,每个装置可存储最近32个SOE;记录最近的10次故障、10次启动的录波数据;记录最新的256条事件记录;
(13)智能化的硬件自检功能,定时对通信链路、电源电压、RAM、ROM、EEPROM、开关量输入/输出回路等自检,如有异常,及时告警。