Outdoor high voltage 12KV/24KV/35KV/36KV/38KV/40.5KV potential transformer OEM/ODM switch circuit breaker operating power supply, output AC220V
JDZ(X)W-35(G) type potential transformer is made of vacuum-casting with outdoor special epoxy resin with arc resistance, UV resistance and aging resistance. The fully enclosed pillar structure is resistant to pollution and moisture. JDZXW-35G transformer does not require special maintenance. It only needs to clean the surface dirt regularly. Because the transformer is fully enclosed and insulated, it is small in size and light in weight. It is suitable for any position and installation in any direction. The secondary output terminal of the transformer is metal. The protective cover is sealed. AC 220V operating power supply, rated output 30VA, limit output 1kva.
The outdoor potential transformer is an outdoor epoxy resin insulated and fully enclosed structure. It is suitable for power metering, voltage monitoring and relay protection in power systems with rated frequency of 50HZ or 60HZ and rated voltage of 35KV. This product complies with IEC6044 and GB1207-2006 "potential transformer" standard.
Model meaning
JDZW-35G outdoor epoxy casting and silicone rubber shell composite insulated potential transformer
J--------------potential transformer
D------------ single phase
Z----------- epoxy casting
W--------Outdoor installation
35---rated voltage (kV)
G-with high voltage side fuse
Conditions of Use
1. Ambient temperature: -25 °C~ ~+40 °C
2. Pollution level: Level IV
Technical Parameters
1. Technical parameters are shown in the table
2. The partial discharge level conforms to the GB1207-2006 "potential transformer" standard.
Precautions:
1. The secondary winding must not be short-circuited or overloaded during use.
2. The potential transformer is closed insulation structure, only the induction withstand voltage test; the built-in voltage transformer switch, when the power frequency test, the transformer should be disconnected from the switch
| model |
Rated voltage ratio |
Rated output |
Limit output |
Rated insulation level |
| 0.2 |
0.5 |
6P |
| JDZW-35 Figure 1 - Figure 2 |
35000/100 |
60 |
150 |
|
1200 |
40.5/95/200 |
| JDZW-35 Figure 3 - Figure 4 |
35000/100/100 |
30/40 |
60/60 |
|
2×600 |
| JDZXW-35G Figure 5 |
35000/√3/100/√3/100/3 |
50 |
90 |
100 |
1000 |
| JDZXW-35G Figure 6 |
35000/√3/100/√3/100/3√3/100/3 |
30 |
30 |
100 |
2×500 |
JDZW-20R type potential transformer is made of vacuum-proof, outdoor-resistant epoxy resin with arc resistance, UV resistance and aging resistance. The fully enclosed pillar structure is resistant to pollution and moisture. JDZW-20R transformer does not require special maintenance. It only needs to clean the surface dirt regularly. Because the transformer is fully enclosed and insulated, it is small in size and light in weight. It is suitable for any position and installation in any direction. The secondary terminal of the transformer is metal. The protective cover is sealed. AC 220V operating power supply, rated output 30VA, limit output 1kva.
The outdoor potential transformer is an outdoor epoxy resin insulated and fully enclosed structure. It is suitable for power metering, voltage monitoring and relay protection in power systems with rated frequency of 50HZ or 60HZ and rated voltage of 35KV. This product complies with IEC6044 and GB1207-2006 "Voltage Transformer" standard.
Model meaning
JDZW-20R outdoor epoxy casting and silicone rubber shell composite insulated potential transformer
J--------------potential transformer
D------------ single phase
Z----------- epoxy casting
W--------Outdoor installation
20---rated voltage (kV)
R-with high voltage side fuse
Conditions of Use
1. Ambient temperature: -25 °C ~ +40 °C
2. Pollution level: Level IV
Technical Parameters
1. Technical parameters are shown in the table
2. The partial discharge level conforms to the GB1207-2006 "potential transformer" standard.
Precautions:
1. The secondary winding must not be short-circuited or overloaded during use.
2. The potential transformer is closed insulation structure, only the induction withstand voltage test; the built-in potential transformer switch, when the power frequency test, the transformer should be disconnected from the switch
| model |
Rated voltage ratio |
Rated output |
Limit output |
Rated insulation level |
| 0.2 |
0.5 |
6P |
| JDZW-20R |
20000/100 |
40 |
100 |
|
800 |
24/65/125 |
| JDZW-20R |
20000/100/100 |
20/30 |
30/30 |
|
2×400 |
| |
|
|
|
|
|
Outdoor high voltage 12KV/24KV/35KV/40.5KV potential transformer switch circuit breaker operating power supply, output AC220V
The power supply is required to operate the high voltage circuit breaker/switch. The operating current can be externally connected to AC or DC 220V power supply, but generally it is externally operated on the 12KV/24KV/40.5KV line to operate the power transformer or potential transformer to obtain AC 220V operating power supply, rated output 30VA, limit output 1kva.
JDZW-10R outdoor epoxy casting and silicone rubber shell composite insulated potential transformer
J--------------potential transformer
D------------ single phase
Z----------- epoxy casting
W--------Outdoor installation
10---rated voltage (kV)
R-with high voltage side fuse
Conditions of Use
1. Ambient temperature: -250C~+400C
2. Pollution level: Level IV
Technical Parameters
1. Technical parameters are shown in the table
2. The partial discharge level conforms to the GB1207-2006 "potential transformer" standard.
Precautions:
1. The secondary winding must not be short-circuited or overloaded during use.
2. The potential transformer is closed insulation structure, only the induction withstand voltage test; the built-in potential transformer switch, when the power frequency test, the transformer should be disconnected from the switch
Weight 45KG creepage distance 580mm
ELECTRIC
