The insulation is my factory in the XJJ type test automatic insulating oil dielectric strength tester is developed on the basis of the oil in the domestic leading level of the oil dielectric strength automatic tester of AXJJ- type ii. The instrument conforms to the International Electrotechnical Commission IEC156 standards and national standards GB507-86 "testing dielectric strength of insulating oil law" requirements. This product by the single-chip microcomputer to control the whole testing process, large screen liquid crystal display, Chinese menu operation, can set the oil sample number, the number of runs, stirring time, standing time, date of test, and automatically print the output of all parameters. Anti interference performance of the products, completely overcomes the disadvantages existing test equipments are susceptible to high voltage breakdown interference, the test process is fully automatic, safe and reliable, accurate measurement.
The functional characteristics of a product:
1 automatic magnetic stirring, to eliminate the artificial mixing uneven, incomplete and unsafe factors.
2 convenient operation, the instrument is factory preset data: according to GB 6 times; mixing time 60 seconds; standing time of 5 minutes, the user can directly enter the operation, also can be to set the parameters according to their own needs.
The 3 big screen liquid crystal display.
4 micro printer output, according to user needs to print multiple copies of the test results.
The 5 regulating system adopts the transmission mode, boost the slow, back to zero quickly.
The 6 operation is finished, the data processing computer automatically, will deviate from the breakdown value of the larger removed, and automatic replacement operation of the time, to ensure the accuracy of the measurement.
7 after the operation with sound signal hint.
Two, use
Dielectric strength measurements of various insulating oil.
Three, technical indicators
1 power: AC220V + 10%, 50Hz + 2Hz
The 2 voltage distortion less than 5%
The 3 output voltage: 0~80KV
4 the rate of pressure rise: 2KV/s + 10%
5 liquid crystal display Chinese
6 micro printer output
7 the measurement accuracy: 1
8 preset range: the oil sample number: 00~99# operating frequency: 0~9 (T)
The mixing time: 0~99 seconds (s) static time: 0~9 (m) and 99 seconds (s)
Date: 01 2000 01 August December 31st ~2099
9 environmental conditions: temperature: -10 ~+30 OC humidity: less than 85%RH
10 dimensions: 440 x 345 x 310
AXJJ-Ⅱ型绝缘油介电强度自动测试仪是我厂在XJJ型试油器基础上研制的在国内处于领先水平的全自动绝缘油介电强度测定器。该仪器完全符合国际电工委员会标准IEC156及国家标准GB507-86《绝缘油介电强度测定法》的要求。本产品由单片机控制全部测试过程，大屏液晶显示，中文菜单操作，可设置油样号、运行次数、搅拌时间、静置时间、试验日期，并自动打印输出全部参数。本产品抗干扰性能强，完全克服了现行测试设备易受高压击穿干扰的弊病，测试过程全自动，安全可靠，测量准确。
一、产品功能特点：
1． 自动磁搅拌，杜绝了人工搅拌不均匀、不完全以及不安全因素。
2． 操作方便，仪器出厂时已按国标预置好数据：次数为6次；搅拌时间60秒；静置时间5分钟，用 户可直接进入运行，也可根据自己的需要重新设定各参数。
3． 大屏液晶显示。
4． 微型打印机打印输出，可根据用户需要打印多份测试结果。
5． 调压系统采用变速方式，升压慢，回零快。
6． 运行完毕，计算机自动进行数据处理，将偏离较大的击穿数值去掉，并自动置换运行该次，保证了测量的准确度。
7． 运行完毕后有音响讯号提示。
二、用途
测量各类绝缘油的介电强度。
三、技术指标
1． 电源：AC220V±10%，50Hz±2Hz
2． 电压崎变：不大于5%
3． 输出电压：0~80KV
4． 升压速率：2KV/s±10%
5． 液晶中文显示
6． 微型打印机打印输出
7． 测量准确度：1.0级
8． 预置范围：油样号：00~99# 运行次数：0~9次（T）
搅拌时间：0~99秒（s） 静置时间：0~9分（m）99秒(s)
日期：2000年01月01日~2099年12月31日
9． 环境条件：温度：-10℃~+30℃ 湿度：≤85%RH
10．外形尺寸：440×345×310
ELECTRIC
