Sequence table AXZ-1D
Apply to AC 50Hz, do check whether the fault phase phase sequence determination and use between 50V-500V line, is a kind of portable instrument.
1, the three belt clip into wires are respectively connected with a three-phase power supply.
2, press the switch, three indicating light, a turntable in the direction of the arrow shown clockwise rotation. Explain the phase sequence and the access of the three-phase power supply into line with hands or clip shown in the same sequence as the sequence of cis.
3, press the switch, such as three indicating lamps have a not bright, said the road off phase, such as three indicating light, rotary reversal, expressed as the inverse phase sequence.
4, after the inspection that release the button switch.
In 5, operation follow the technical performance requirements of the time, otherwise it will overheat and damage the instrument.

 相序表AXZ-1D

适用于交流50Hz,在50V-500V之间的线路中做相序测定及检查是否断相之用,是一种便携式仪器。

1、将三根带夹引入线分别接三相电源。
2、按下开关，三只指示灯全亮，转盘按箭头方向所示顺时针转动。说明三相电源相序与接入的表针或带夹的引入线所示相序相同为顺相序。
3、按下开关，如三只指示灯有一只不亮，则表示该路断相，如三只指示灯全亮，转盘逆转，表示为逆相序。
4、检查结束后即松开按钮开关。
5、操作时请按照技术性能要求的时间执行，否则将过热而损坏仪表。